| 产品名称 | 产品描述 | 单位 | 材料 | 表面 | QTY |
| 堵头-Plug | BLIND PLUG, W/1-5/8 8UN THD,MATERIAL REQUIREMENTS AS PER AISI 4130, MIN. 60K PSI YIELD STRENGTH,C-114 RUST PREVENTION,APPLY THREAD WITH XYLAN COAT / MOLY COATDrawing Number:10003274190 | pcs | 4130 60K | 161 | |
| 堵头-Plug | LOCKDOWN PLUG SCREW W/ 3.50 OAL,MATERIAL REQUIREMENTS AS PER AISI,4130, MIN. 60K PSI YIELD STRENGTH,C-114 RUST PREVENTION,APPLY THREAD W/ XYLAN COAT / MOLY COAT,Drawing Number:10003274191 | pcs | 4130 60K | 158 | |
| 适配器(适配法兰)-Adapter(DSA) | TBG HD ADAPTER BDY, 11 5M HUB,ROTATING FLG, W/ 6-3/8 4 STUB ACME,FOR 3-1/8 5M THDS FLG TOP, W/ PREP,FOR TBG HGR NECK, W/ PREP FOR ESP,FEEDTHRU,1/4 NON-ConTINUOUS DHSV,PORT W/ NEEDLE VALVE, API 6A, PSL2,CS-1001 COAT,Drawing dumber: | pcs | 4130 75K | 磷化 | 29 |
| 套管悬挂器-Casing Hanger | CASING HANGER, MANDREL, 13 NOM W/ 9-5/8 BC BOX BTM X 10-1/2 4TPI STUB,ACME 2G LH, FLUTED W/ 6" TONG NECK, W/ 9-5/8" SLICK NECK #40, API 6A, PSL2,PR2, P-U, DD, CS-1001-2 COAT,PAINT YELLOW .25 WIDTH ARROUND AT LOCATION SHOWN ON DRAWIN, PROTECT STUB ACME THREAD AND SEALING AREA WITH SUITABLE END CAP,Drawing number:10003275256 | pcs | 4130 75K | 磷化 | 30 |
| 阀杆-Stem |
STEM, VALVE, F/ 2 1/16-5M/6.5M/10M & 1 13/16-10M, INC 718, PSL: 3
TEMP: P-U MATL. CLASS: HH,MS-4002,Drawing number:10003274399 |
pcs | 718 120K | 131 | |
| 阀盖-Bonnet |
BONNET, VALVE, BODY, 3-1/8 5M/6.5M AM05-20, W/ INTERNAL CHECK VALVE PREP, PSL: 3, TEMP: K-X, MATL. CLASS: EE,MS-2001, CS-1001 PHOSPHATE COATING ZN & MN: ON ENTIRE BODY EXCEPT 32 RMS SURFACES,Drawing number:10003275197 |
pcs | 4130 60K | 磷化 | 38 |
| 阀杆-Stem | STEM, VALVE, HWO, AM10-20, F/ 3 1/8-5M/6.5M & 3 1/16-10M, INC 718, PSL: 3 TEMP:P-U MATL. CLASS: HH,MS-4002,Drawing Number:10003274806 | pcs | 718 120K | 135 | |
| 井口零件-WellHead Parts | JUNK RING 1.49 OD X 1.01 ID X .62 THK,SMS-100,SCS-14, | pcs | 4130 75K | 磷化 | 67 |
| 组合法兰-Companion Flange | FLANGE, COMPANION, 2-1/16 API 5M R/RX-24 X 2 API LINE PIPE THREADPSL: 3,TEMP: P-U MATL. CLASS: EE,MS-0001 MATERIAL REQUIREMENT,MS-2001 ALTERNATE MATERIAL,CS-1001-2 COAT,PAINTING,Drawing Number:10002938929 | pcs | 4130 75K | 磷化 | 97 |
| 组合法兰-Companion Flange | CMPN FLG THRD 3 1/8-5M X 2 API LPPSL: 3 Temp: P-U Matl. Class: EE-NL,MS-2001,CS-1001 COAT,PAINT O.D,Drawing Number:10002938922 | pcs | 4130 60K | 磷化 | 55 |
| 井口零件-WellHead Parts | 11-5M CLAMP HUB FLANGEPSL: 2 Temp: P-U,Matl. Class: EE,MS-0001,C-110C COAT,Drawing Number:10000463496 | pcs | 4130 75K | 磷化 | 29 |
| 井口零件-WellHead Parts | SCREW, LOCKDOWN, KN-ET, BDY, 1-1/8 8UN-2A, INC718,F/ 11 -3M, 13 5/8 -3M & 16 3/4 -3M,PSL: - TEMP: S-U MATL. CLASS: HH,MS-4002,C-114,Drawing Number 10000463907 | pcs | 718 120K | 182 | |
| 压盖螺母-Gland Nut | GLAND, PACKING, KSB-THEN 11-NOM HANGER,MS-2005,C-110-C COAT,Drawing number:10000942440 | pcs | 4130/4140/4340/8630 100K | 磷化 | 9 |
| 适配器(适配法兰)-Adapter(DSA) | ADPTR, TREE TOP, BDY, 3 1/8-5M X 5 3/4-4 ACME-2G THD, W/ 3 1/2 EU LIFT THD, A-STL,PSL: 3 Temp: P-U Matl. Class: EE-NL,MS-0001,C-110-C,Drawing Number:10000465442 | pcs | 4130 75K | 磷化 | 29 |
| 堵头-Plug | PLUG, BLANKING, TREE TOP ADPTR, 3 NOM, 5M, 1/2 NPT,A-STL PSL: 3 Temp: P-U Matl. Class: EE-NL,MS-0001,CS-1001-2 COAT Drawing Number 10000465527 | pcs | 4130 75K | 磷化 | 28 |
| 阀板-Gate | GATE, AM10-20 VLV, HWO, 3 1/8-5M/6.5M & 3 1/16-10M,4130, PSL: 3 TEMP: K-X MATL CLASS: DD,MS-0001, SCS-21 COAT FACES W/ WSL-10 COAT INSPECTION, C-114 RUST PREVENTION,Drawing number:10003274807 | pcs | 4130 75K | TC | 136 |
| 阀座-Seat | SEAT, AM05-20 VALVE, 3 1/8-5M/6.5M, 4130, PSL: 3 TEMP: K-X MATL CLASS: DD,MS-0001,SCS-21 COAT FACES W/ WSL-10 COAT INSPECTION,C-114 RUST PREVENTION,Drawing Number:10003274808 | pcs | 4130 75K | TC | 274 |
| 螺栓和螺母组合-Stud and Nut | STUD W/TWO NUT, 1-7/8 8UN X 16.000 LG, B7 STUD & A194 GR 2H NUT, ZINC,20E, BSL1 | pcs | 11 | ||
| 井口零件-WellHead Parts | ROTATING FLANGE, 3-1/8 5M STDD W/ 6 3/8-4 STUB ACME-2G,PSL: 2 Temp: P-U Matl Class: EE-NL,MS-0001,CS-1001-2 COAT,C-114 RUST PREVENTION | pcs | 4130 75K | TC | 34 |
